Practical realization of electronically adjustable universal filter using commercially available IC-based VBDA

This paper describes the practical realization of electronically adjustable voltage-mode universal filter with three inputs and single output (TISO) using the commercially available integrated circuit (IC)-based voltage differencing buffered amplifiers (VDBAs). The realization is resistor-less and contains only two VDBAs and two capacitors. The described filter structure can realize all the five standard biquadratic filter functions from the same configuration without needing any component matching criterions. It also exhibits low-output impedance, which enables for easy cascading in voltage-mode operation. Owing to practical VDBA realization, the filter circuit can be easily made electronically tunable with orthogonal o-Q tuning. The effects of the VDBA non-idealities on the filter performance have been analyzed in detail. To prove the theoretical finding, the performance of the studied circuit was also experimentally measured using the operational transconductance amplifie

Tunable Mixed-Mode Voltage Differencing Buffered Amplifier-Based Universal Filter with Independently High-Q Factor Controllability

This paper proposes the design of a mixed-mode universal biquad configuration, which realizes generic filter functions in all four possible modes, namely voltage mode (VM), current mode (CM), transadmittance mode (TAM), and transimpedance mode (TIM). The filter architecture employs two voltage differencing buffered amplifiers (VDBAs), two resistors and two capacitors, and can provide lowpass (LP), bandpass (BP), highpass (HP), bandstop (BS), and allpass (AP) biquadratic filtering responses without any circuit alteration. All passive elements used are grounded, except VM. The circuit not only allows for the electronic tuning of the natural angular frequency (o), but also achieves orthogonal tunability of the quality factor (Q). It also provides the feature of availability of output voltage at the low-output impedance terminal in VM and TIM, and does not require inverting-type or double-type input signals to realize all the responses. Moreover, in all modes of operation, the high-Q filter can be easily obtained by adjusting a single resistance value. Influences of the VDBA nonidealities and parasitic elements are also discussed in detail. PSPICE simulations with TSMC 0.18-µm CMOS process parameters and experimental testing results with commercially available IC LT1228s have been used to validate the theoretical predictions

Single VDGA-Based Mixed-Mode Electronically Tunable First-Order Universal Filter

This article presents a mixed-mode electronically tunable first-order universal filter configuration employing only one voltage differencing gain amplifier (VDGA), one capacitor, and one grounded resistor. With the appropriate selection of the input signals, the proposed circuit can realize all three first-order standard filter functions, namely low pass (LP), high pass (HP), and all pass (AP), in all four possible modes, including voltage mode (VM), trans-admittance mode (TAM), current mode (CM), and trans-impedance mode (TIM), from the same circuit structure. It also provides an electronic tuning of the pole frequency and the passband gain by varying transconductance values. Non-ideal and parasitic effect analyses of the proposed circuit were also carried out. PSPICE simulations and experimental findings have both confirmed the performance of the design. A number of simulations and experimental observations confirm the viability of the suggested configuration in practical applications

Single VDGA-Based Mixed-Mode Universal Filter and Dual-Mode Quadrature Oscillator

This article presents the circuit designs for a mixed-mode universal biquadratic filter and a dual-mode quadrature oscillator, both of which use a single voltage differencing gain amplifier (VDGA), one resistor, and two capacitors. The proposed circuit has the following performance characteristics: (i) simultaneous implementation of standard biquadratic filter functions with three inputs and two outputs in all four possible modes, namely, voltage-mode (VM), current-mode (CM), trans-admittance-mode (TAM), and trans-impedance-mode (TIM); (ii) electronic adjustment of the natural angular frequency and independently single-resistance controllable high-quality factor; (iii) performing a dual-mode quadrature oscillator with simultaneous voltage and current output responses; (iv) orthogonal resistive and/or electronic control of the oscillation condition and frequency; (v) employing all grounded passive components in the quadrature oscillator function; and (vi) simpler topology due to the use of a single VDGA. VDGA non-idealities and parasitic elements are also investigated and analyzed in terms of their influence on circuit performance. To prove the study hypotheses, computer simulations with TSMC 0.18 μm CMOS technology and experimental confirmatory testing with off-the-shelf integrated circuits LM13600 have been performed